Installation Guide

What You'll Need: A drill, a 1/4" drill bit, a screwdriver, a hammer and a level (optional)
What's Included: Two 1.5" screws and Two drywall anchors

1. Choose a clean, flat wall surface.

2. Use a level to ensure straight placement.

3. Mark two points that are 8 inches apart on the wall.

4. Drill holes at the marked points using a 1/4" drill bit.

5. Insert the drywall anchors into the holes and gently tap them flush with the wall using a hammer.

6. Insert the screws into the anchors using a screwdriver leaving approximately 0.5" of the screw exposed.

7. Align the mounting holes with the screws and lower the toy into place.

8. Securely mounted and ready for hours of hands-on, screen-free fun!

Adult installation required.